设为首页收藏本站
查看: 41|回复: 0

[PHP] php启动报错的解决方法

[复制链接]

论坛元老

Rank: 6Rank: 6

积分
34274
主题
17031
UID
1347
M币
67
贡献
17176

  • 发表于 2014-3-29 12:33:00 | 显示全部楼层 |阅读模式
    php 启动报错的解决办法
    php 启动时报错的情况,如下:
    [root@abc lnmp]# service php-fpm start Starting php-fpm eAccelerator: Could not allocate 67108864 bytes, the maximum size the kernel allows is 33554432 bytes. Lower the amount of memory request or increase the limit in /proc/sys/kernel/shmmax. [04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Warning: [eAccelerator] Can not create shared memory area in Unknown on line 0 www.jbxue.com [04-Dec-2013 19:06:44] NOTICE: PHP message: PHP Fatal error: Unable to start eAccelerator module in Unknown on line 0 failed
    解决方法:
    [root@abc lnmp]# vi /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP synCOOKIEs net.ipv4.tcp_synCOOKIEs = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 fs.file-max=65535 net.ipv4.tcp_max_syn_backlog = 65536 net.core.netdev_max_backlog = 32768 net.core.somaxcOnn= 32768 net.core.wmem_default = 8388608 net.core.rmem_default = 8388608 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 2 net.ipv4.tcp_tw_recycle = 1 #net.ipv4.tcp_tw_len = 1 net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_mem = 94500000 915000000 927000000 net.ipv4.tcp_max_orphans = 3276800 # TIME_OUT后等待时间 #net.ipv4.tcp_fin_timeout = 30 #net.ipv4.tcp_keepalive_time = 120 net.ipv4.ip_local_port_range = 1024 65535 kernel.shmmax = 128000000
    加上最后一句话 kernel.shmmax = 128000000
    然后应用sysctl -p
    [root@abc lnmp]# service php-fpm start Starting php-fpm done [root@abc lnmp]# /usr/bin/memcachedstart
    回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    在我站开通SVIP可同时获得17个站点VIP资源 立即登录 立即注册
    快速回复 返回顶部 返回列表